The product, in perspective.
This is the matt red-oxide pre-fabrication primer for suitable metalwork in mild environments. Crown calls for timely overcoating, so include the intended finishing coat and fabrication schedule.
A matt red-oxide primer for metal within its specified service conditions. The precautions exclude corrosive and coastal environments. The intended metal exposure is an essential part of product selection.
Where it works.
The documented surface or use for Red Oxide (Prefab) Primer Matt is prepared metal in mild environments. Identify the actual material and its condition before selecting the preparation and finishing system. An existing coating, a newly prepared base and a repaired area can need different treatment.
- A matt red-oxide primer for metal within its specified service conditions.
- Available quotation packs and component requirements are checked for your selected product, rather than inferred from another grade.
Before you start.
Prepare clean and dry steel or iron, removing rust, contamination and failing coatings. The sheet distinguishes new metal from patch-priming a sound previously painted surface.
For a useful specification check, share whether the surface is bare or previously treated, the name of the existing coating if known, and any visible damage or moisture exposure. Preparation products should be selected for that condition before the finishing material is applied.
Companion products to specify
The technical sheet references these materials for its preparation, thinning or coating scenarios. Confirm the scenario for your substrate.
Application and project planning.
Follow the matt prefab-primer route, including the specified undercoat before the compatible topcoat.
The precautions exclude corrosive and coastal environments. The intended metal exposure is an essential part of product selection.
Measure the area to be treated and allow for the number of coats required by the coating system. Surface texture, absorption, application method and material losses can change the amount needed. Tell us the area and proposed system when requesting packs; the published coverage is a planning reference, not a guarantee of your project’s consumption.
The useful details.
- Product
- Red Oxide (Prefab) Primer Matt
- Documented use
- Prepared metal in mild environments
- Finish
- Matt
- Application
- Brush, roller or spray
- Drying
- Touch dry: 4 -5. Recoatable: 8 – 16 hrs
- Cleaner
- White Spirit.
- Finish
- Matt
- Colours
- Red Oxide
- Coverage
- 8 – 10 m2/l per coat; rate depends on substrate, film thickness and application conditions.
Figures above are from the linked manufacturer information. Check the complete technical sheet for substrate-specific preparation, thickness, environmental conditions and limitations.
Good questions, useful answers.
Should I also request an undercoat?
The matt primer’s documented system includes an undercoat before the finishing paint. Include the entire intended system in your product list.
What should I include in my quotation?
Give the exact product name, requested pack size, quantity and relevant colour reference. Add the surface, application and destination so the product and delivery requirements can be checked together.
How do I choose the right pack and quantity?
Use the available pack choices and the quantity required by your coating or installation plan. Tell us the area, number of coats or relevant joint dimensions if you need help assembling a material list.
Can I confirm a colour from the product picture?
The image represents product packaging, not an exact shade match. Use a manufacturer colour reference for a coloured product, or specify that colour is not applicable for the material you need.
Keep the specification close.
Use the full manufacturer technical information when planning preparation and application. Include the exact product and system details when contacting KariVex about a quotation.
