The product, in perspective.
Crown Road Marking Paint is a solvent-based modified-alkyd marking paint for roads and kerbs. Specify the surface and colour required; acrylic marking paints and hot-melt systems are separate products.
Roadline marking paint for the road surfaces covered by its specification. The sheet warns that use on concrete may give poor adhesion and cracking; it points to alternative road-marking systems for that substrate.
Where it works.
The documented surface or use for Crown Roadline Paint is suitable road and kerb surfaces. Identify the actual material and its condition before selecting the preparation and finishing system. An existing coating, a newly prepared base and a repaired area can need different treatment.
- Roadline marking paint for the road surfaces covered by its specification.
- Available quotation packs and component requirements are checked for your selected product, rather than inferred from another grade.
Before you start.
The road must be clean and dry. Repair defects, remove loose particles and allow washed surfaces to dry before marking; the substrate’s condition affects adhesion.
For a useful specification check, share whether the surface is bare or previously treated, the name of the existing coating if known, and any visible damage or moisture exposure. Preparation products should be selected for that condition before the finishing material is applied.
Application and project planning.
Apply with the method and film thickness specified for Roadline Paint. Include the road surface and marking requirements when planning quantity.
The sheet warns that use on concrete may give poor adhesion and cracking; it points to alternative road-marking systems for that substrate.
Measure the area to be treated and allow for the number of coats required by the coating system. Surface texture, absorption, application method and material losses can change the amount needed. Tell us the area and proposed system when requesting packs; the published coverage is a planning reference, not a guarantee of your project’s consumption.
The useful details.
- Product
- Crown Roadline Paint
- Documented use
- Suitable road and kerb surfaces
- Finish
- Marking paint
- Application
- By specially designed Spraying Machines or Rollers. Brushing
- Drying
- Surface Dry: 4 -10 mins. Hard Dry: 15 – 30 mins.
- Cleaner
- Crown Road Marking Thinner
- Finish
- Matt
- Colours
- White, Yellow and Black
Figures above are from the linked manufacturer information. Check the complete technical sheet for substrate-specific preparation, thickness, environmental conditions and limitations.
Good questions, useful answers.
Can I use it on a concrete surface?
Check a concrete-suitable marking system. The Roadline sheet specifically distinguishes concrete from the road surfaces intended for this product.
What should I include in my quotation?
Give the exact product name, requested pack size, quantity and relevant colour reference. Add the surface, application and destination so the product and delivery requirements can be checked together.
How do I choose the right pack and quantity?
Use the available pack choices and the quantity required by your coating or installation plan. Tell us the area, number of coats or relevant joint dimensions if you need help assembling a material list.
Can I confirm a colour from the product picture?
The image represents product packaging, not an exact shade match. Use a manufacturer colour reference for a coloured product, or specify that colour is not applicable for the material you need.
Keep the specification close.
Use the full manufacturer technical information when planning preparation and application. Include the exact product and system details when contacting KariVex about a quotation.
