The product, in perspective.
Vinyl Matt Luxury Emulsion is an acrylic-blend interior decorative paint. It provides a matt appearance on suitable new or previously painted surfaces; request the shade and pack size alongside the surface condition.
An interior matt finish for a calm, understated colour story. The finish is an interior decorative choice. Match the intended surface and coating conditions rather than assuming all matt paints serve the same purpose.
Where it works.
The documented surface or use for Crown Vinyl Luxury Matt Emulsion is prepared interior masonry, boards and timber. Identify the actual material and its condition before selecting the preparation and finishing system. An existing coating, a newly prepared base and a repaired area can need different treatment.
- An interior matt finish for a calm, understated colour story.
- Available quotation packs and component requirements are checked for your selected product, rather than inferred from another grade.
Before you start.
Prepare new plaster and remove loose particles. For an existing painted wall, check whether the coating is sound emulsion, oil-based enamel or loose and chalking before choosing the primer route.
For a useful specification check, share whether the surface is bare or previously treated, the name of the existing coating if known, and any visible damage or moisture exposure. Preparation products should be selected for that condition before the finishing material is applied.
Application and project planning.
Apply the documented coats with the correct water dilution for the job. A properly prepared base helps the matt finish appear more even.
The finish is an interior decorative choice. Match the intended surface and coating conditions rather than assuming all matt paints serve the same purpose.
Measure the area to be treated and allow for the number of coats required by the coating system. Surface texture, absorption, application method and material losses can change the amount needed. Tell us the area and proposed system when requesting packs; the published coverage is a planning reference, not a guarantee of your project’s consumption.
The useful details.
- Product
- Crown Vinyl Luxury Matt Emulsion
- Documented use
- Prepared interior masonry, boards and timber
- Finish
- Matt
- Application
- Brush, roller or airless spray
- Drying
- Surface dry 30min max & Hard dry after 45min max
- Cleaner
- Water
- Finish
- Matt
- Colours
- Available in a range of over 7000 colours from Ambiance, RAL, BS 4800 and various colour charts through dispensing system.
- Coverage
- 10 – 12 m²/l per coat; rate depends on substrate, film thickness and application conditions.
Figures above are from the linked manufacturer information. Check the complete technical sheet for substrate-specific preparation, thickness, environmental conditions and limitations.
Good questions, useful answers.
How is it different from Silk Vinyl?
The defining appearance here is matt. Silk Vinyl has a soft sheen; compare the documented finish and the surface requirements when choosing your room’s look.
What should I include in my quotation?
Give the exact product name, requested pack size, quantity and relevant colour reference. Add the surface, application and destination so the product and delivery requirements can be checked together.
How do I choose the right pack and quantity?
Use the available pack choices and the quantity required by your coating or installation plan. Tell us the area, number of coats or relevant joint dimensions if you need help assembling a material list.
Can I confirm a colour from the product picture?
The image represents product packaging, not an exact shade match. Use a manufacturer colour reference for a coloured product, or specify that colour is not applicable for the material you need.
Keep the specification close.
Use the full manufacturer technical information when planning preparation and application. Include the exact product and system details when contacting KariVex about a quotation.
