The product, in perspective.
This epoxy floor coating is supplied as a two-component system with a semi-gloss finish. State the substrate, floor use and traffic when requesting it, and include the companion hardener and preparation system.
A two-component floor coating for an appropriately prepared epoxy floor system. A two-pack coating has a working time and curing process. Plan the substrate preparation and component quantities before mixing.
Where it works.
The documented surface or use for Two Pack Epoxy Floor Paint is suitable prepared floors. Identify the actual material and its condition before selecting the preparation and finishing system. An existing coating, a newly prepared base and a repaired area can need different treatment.
- A two-component floor coating for an appropriately prepared epoxy floor system.
- Available quotation packs and component requirements are checked for your selected product, rather than inferred from another grade.
Before you start.
Remove loose material and assess the floor’s dryness, strength and surface profile. Smooth floor screeds require the preparation route specified in the sheet to develop an appropriate key.
For a useful specification check, share whether the surface is bare or previously treated, the name of the existing coating if known, and any visible damage or moisture exposure. Preparation products should be selected for that condition before the finishing material is applied.
Application and project planning.
Use the matching epoxy primer, hardener and thinner, and follow the floor-paint sheet’s mixing and coating sequence.
A two-pack coating has a working time and curing process. Plan the substrate preparation and component quantities before mixing.
Measure the area to be treated and allow for the number of coats required by the coating system. Surface texture, absorption, application method and material losses can change the amount needed. Tell us the area and proposed system when requesting packs; the published coverage is a planning reference, not a guarantee of your project’s consumption.
The useful details.
- Product
- Two Pack Epoxy Floor Paint
- Documented use
- Suitable prepared floors
- Finish
- Semi-gloss
- Application
- Brush, roller or spray
- Drying
- Surface dry in 2 hours, re-coatable in 14 hours. Attains maximum hardness about 7 days after application.
- Cleaner
- Thinner for Epoxy Paints
- Finish
- Semi-gloss
- Colours
- Red Oxide, Grey, Green and a few selected shades.
- Coverage
- 8 – 10 m2/l per coat; rate depends on substrate, film thickness and application conditions.
Figures above are from the linked manufacturer information. Check the complete technical sheet for substrate-specific preparation, thickness, environmental conditions and limitations.
Good questions, useful answers.
Is the paint the whole floor system?
No. Include the floor’s material and condition, plus the primer, hardener and thinner needed by the specified epoxy system.
What should I include in my quotation?
Give the exact product name, requested pack size, quantity and relevant colour reference. Add the surface, application and destination so the product and delivery requirements can be checked together.
How do I choose the right pack and quantity?
Use the available pack choices and the quantity required by your coating or installation plan. Tell us the area, number of coats or relevant joint dimensions if you need help assembling a material list.
Can I confirm a colour from the product picture?
The image represents product packaging, not an exact shade match. Use a manufacturer colour reference for a coloured product, or specify that colour is not applicable for the material you need.
Keep the specification close.
Use the full manufacturer technical information when planning preparation and application. Include the exact product and system details when contacting KariVex about a quotation.
