The product, in perspective.
Dr. Fixit PU Sealant is a one-component, non-sag polyurethane sealant. Request the required colour and sausage pack, and identify the joint materials before selecting the application.
A polyurethane joint sealant for the application detailed in its sheet. Joint width, depth, movement and backing affect the installation. Sealant quantity cannot be planned from the joint length alone.
Where it works.
The documented surface or use for Dr. Fixit Pu Sealant is prepared horizontal or vertical construction and movement joints. Identify the actual material and its condition before selecting the preparation and finishing system. An existing coating, a newly prepared base and a repaired area can need different treatment.
- A polyurethane joint sealant for the application detailed in its sheet.
- Available quotation packs and component requirements are checked for your selected product, rather than inferred from another grade.
Before you start.
Make the joint faces sound, clean and dry. Remove dust and contamination, repair damaged edges, and install the specified backing or bond-breaking arrangement.
For a useful specification check, share whether the surface is bare or previously treated, the name of the existing coating if known, and any visible damage or moisture exposure. Preparation products should be selected for that condition before the finishing material is applied.
Application and project planning.
Apply the sealant using the documented gun and tooling process. Masking and removal timing help achieve the required joint finish.
Joint width, depth, movement and backing affect the installation. Sealant quantity cannot be planned from the joint length alone.
Quantity planning starts with the installation: surface area or joint dimensions, the specified system build, and the number of application stages. Include corners, junctions, penetrations or other details relevant to the job. The sales team can check the material list against the project requirements; application must follow the manufacturer’s current instructions.
The useful details.
- Product
- Dr. Fixit Pu Sealant
- Documented use
- Prepared horizontal or vertical construction and movement joints
- Finish
- Sealant
Figures above are from the linked manufacturer information. Check the complete technical sheet for substrate-specific preparation, thickness, environmental conditions and limitations.
Good questions, useful answers.
What measurements should I provide?
Include the joint length, width and depth, the materials on both sides and the intended exposure, along with the specified backing arrangement if known.
What should I include in my quotation?
Give the exact product name, requested pack size, quantity and relevant colour reference. Add the surface, application and destination so the product and delivery requirements can be checked together.
How do I choose the right pack and quantity?
Use the available pack choices and the quantity required by your coating or installation plan. Tell us the area, number of coats or relevant joint dimensions if you need help assembling a material list.
Can I confirm a colour from the product picture?
The image represents product packaging, not an exact shade match. Use a manufacturer colour reference for a coloured product, or specify that colour is not applicable for the material you need.
Keep the specification close.
Use the full manufacturer technical information when planning preparation and application. Include the exact product and system details when contacting KariVex about a quotation.
