The product, in perspective.
Crown Polyfilla is a powdered general-purpose filler for small interior dents and cracks. Identify the area and defect size when requesting it; economy and standard formulations must remain distinguishable.
An interior filler for local surface repairs before painting. Repair depth and the condition of the base affect the work. Keep standard Polyfilla distinct from Economy Polyfilla when specifying the grade.
Where it works.
The documented surface or use for Crown Polyfilla is interior surface repairs. Identify the actual material and its condition before selecting the preparation and finishing system. An existing coating, a newly prepared base and a repaired area can need different treatment.
- An interior filler for local surface repairs before painting.
- Available quotation packs and component requirements are checked for your selected product, rather than inferred from another grade.
Before you start.
Dust off loose material and remove failing paint to a firm base. The sheet also specifies treatment of nail heads before filling the surrounding repair.
For a useful specification check, share whether the surface is bare or previously treated, the name of the existing coating if known, and any visible damage or moisture exposure. Preparation products should be selected for that condition before the finishing material is applied.
Application and project planning.
Press the prepared paste firmly into the defect; deeper cracks are filled in stages. Sand the fully hardened repair smooth before the next coating stage.
Repair depth and the condition of the base affect the work. Keep standard Polyfilla distinct from Economy Polyfilla when specifying the grade.
Measure the area to be treated and allow for the number of coats required by the coating system. Surface texture, absorption, application method and material losses can change the amount needed. Tell us the area and proposed system when requesting packs; the published coverage is a planning reference, not a guarantee of your project’s consumption.
The useful details.
- Product
- Crown Polyfilla
- Documented use
- Interior surface repairs
- Application
- Putty knife, spatula or trowel
- Drying
- Touch dry: 4 hours. Full cure 24 hours. Recoatable after 4hrs with water-based
- Cleaner
- Water
- Finish
- Matt
- Colours
- Off-White
Figures above are from the linked manufacturer information. Check the complete technical sheet for substrate-specific preparation, thickness, environmental conditions and limitations.
Good questions, useful answers.
Can I sand and paint over the repair?
The sheet calls for the filled area to harden before fine sanding and painting. Allow the repair to reach that condition rather than rushing to the topcoat.
What should I include in my quotation?
Give the exact product name, requested pack size, quantity and relevant colour reference. Add the surface, application and destination so the product and delivery requirements can be checked together.
How do I choose the right pack and quantity?
Use the available pack choices and the quantity required by your coating or installation plan. Tell us the area, number of coats or relevant joint dimensions if you need help assembling a material list.
Can I confirm a colour from the product picture?
The image represents product packaging, not an exact shade match. Use a manufacturer colour reference for a coloured product, or specify that colour is not applicable for the material you need.
Keep the specification close.
Use the full manufacturer technical information when planning preparation and application. Include the exact product and system details when contacting KariVex about a quotation.
