The product, in perspective.
Aquavar is a water-based translucent wood finish for suitable interior or exterior joinery and furniture. Crown excludes floor coatings from its listed use; specify the required clear or coloured version.
A water-based varnish for prepared wooden joinery, panels and furniture. The recorded use excludes floors, and the sheet warns against overcoating with two-pack or solvent-based coatings.
Where it works.
The documented surface or use for Crown Wood Master Aquavar Varnish is wooden doors, windows, panels and furniture; excludes floors. Identify the actual material and its condition before selecting the preparation and finishing system. An existing coating, a newly prepared base and a repaired area can need different treatment.
- A water-based varnish for prepared wooden joinery, panels and furniture.
- Available quotation packs and component requirements are checked for your selected product, rather than inferred from another grade.
Before you start.
Prepare dry timber free of grease and contamination, sand along the grain and remove dust. The sheet specifies removal of the old coating when treating previously coated timber.
For a useful specification check, share whether the surface is bare or previously treated, the name of the existing coating if known, and any visible damage or moisture exposure. Preparation products should be selected for that condition before the finishing material is applied.
Application and project planning.
Follow the Aquavar first-coat and finishing-coat water dilution instructions for the prepared wood.
The recorded use excludes floors, and the sheet warns against overcoating with two-pack or solvent-based coatings.
Measure the area to be treated and allow for the number of coats required by the coating system. Surface texture, absorption, application method and material losses can change the amount needed. Tell us the area and proposed system when requesting packs; the published coverage is a planning reference, not a guarantee of your project’s consumption.
The useful details.
- Product
- Crown Wood Master Aquavar Varnish
- Documented use
- Wooden doors, windows, panels and furniture; excludes floors
- Finish
- Translucent
- Application
- Brush, roller or airless spray
- Drying
- Touch dry: 30 minutes. Overcoating: 2-3 hours
- Cleaner
- Water
- Finish
- Semi- gloss and matt
- Colours
- Clear and 18 selected shades
- Coverage
- 10– 14 m2/l per coat; rate depends on substrate, film thickness and application conditions.
Figures above are from the linked manufacturer information. Check the complete technical sheet for substrate-specific preparation, thickness, environmental conditions and limitations.
Good questions, useful answers.
Can I use Aquavar on a wooden floor?
Floors are excluded from the documented use for this product. Describe the floor and its service conditions to have a suitable flooring finish checked separately.
What should I include in my quotation?
Give the exact product name, requested pack size, quantity and relevant colour reference. Add the surface, application and destination so the product and delivery requirements can be checked together.
How do I choose the right pack and quantity?
Use the available pack choices and the quantity required by your coating or installation plan. Tell us the area, number of coats or relevant joint dimensions if you need help assembling a material list.
Can I confirm a colour from the product picture?
The image represents product packaging, not an exact shade match. Use a manufacturer colour reference for a coloured product, or specify that colour is not applicable for the material you need.
Keep the specification close.
Use the full manufacturer technical information when planning preparation and application. Include the exact product and system details when contacting KariVex about a quotation.
